Produk  

View as
Show 20 50 80 120
Sort by

Rode Microphone NT-USB

Mikrofon USB NT-USB dari Rode adalah mikrofon USB cardioid, alamat samping yang mampu menangkap audio hingga resolusi 16-bit / 48 kHz. Ini memiliki amplifier headphone terintegrasi dan jack headphone stereo 1/8 "yang memungkinkan untuk pemantauan. Direct Mix Control on-mic memungkinkan Anda untuk memilih antara input mic dan input sumber untuk pemantauan.

NT-USB kompatibel dengan penggunaan kit kamera opsional. Termasuk dengan mic adalah pelindung pop, dudukan meja tripod, dudukan cincin, kabel USB sepanjang 20 kaki, dan kantong penyimpanan.
  • 3.5mm stereo headphone jack for zero-latency monitoring
  • Direct mix control between mic input and source output
  • Compatible with Apple iPad with optional camera kit
  • Cardioid polar pattern

Rode Lavalier Lapel Microphone

The RØDE Lavalier is a discreet lapel microphone that provides broadcast-quality audio when close-miked in almost any scenario.

The Lavalier's low self-noise, user friendly omni-directional polar pattern and minimal appearance make it an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.

The microphone capsule is connected via a 1.2m (4') shielded, Kevlar® reinforced cable that has been rigorously strain tested up to 10kg to ensure reliable performance.

The included mini-furry for high wind protection ensures quality recordings in adverse environments, and the included cable management clips ensure that you are able to minimise the microphone and cable visibility, while providing maximum mobility for the wearer.

The supplied anti-trauma water resistant case provides rugged and secure protection for the microphone, cable, clips and included accessories.

Knowing that versatility is paramount in any product, RØDE has developed the MiCon™ connector system which provides seamless integration between the Lavalier and a wide range of wireless systems as well as consoles, cameras and portable recorders.

The RØDE Lavalier lapel microphone is designed and made in Australia and is covered by RØDE Microphones' innovative 5 year 'no questions asked' warranty which provides 12 months of complete cover, and an optional US$99 replacement microphone during the extended warranty period.
Lavalier Specifications

Rode Micro Boompole Pro

The Micro Boom pole Pro is a unique, modular booming device that allows location sound engineers to capture audio in confined or difficult spaces. Optimized for use with the Video Micro microphone, the Micro Boom pole Pro's three sections combine to a maximum length of 2.2m (7'2"). Using an industry standard 3/8" thread, these sections can also be used to extend the Boom pole Pro to reach to over 3.7m (12').

Rode Deluxe Wind Shield - WS 7 For NTG3

The RØDE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG3 and any shotgun microphone with a maximum slot length of 186.5mm (7 1/4") and a diameter of 19-20mm.

Rode SM3-R Camera Shoe Shock Mount

The SM3-R Camera Shoe Shockmount from RØDE is a suspension shockmount with a camera shoe adapter for mounting various RØDE microphones onto a camera using a standard hot/cold shoe mount. It is built with dual Rycote Lyre mounts to provide maximum isolation from any handling vibrations.

Featuring four possible mounting points to suit the complete range of compatible RØDE on-camera microphones, the shock mount also has an integrated cable management clip. It is compatible with the following microphones: M5, NT5, NT55, NTG1, NTG2, NTG3, NTG4, and NTG4+.

Microphone Compatibility
M5, NT5, NT55, NTG1, NTG2, NTG3, NTG4, and NTG4+

Rode Deadcat For Videomic Rycote

The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.

The Rode Dead Cat Wind Muff is a zip-on furry cover with deep artificial fur that fits snugly over the Rode VideoMic or the NTG-1 and NTG-2 microphones. The Wind Muff greatly reduces wind noise when recording in windy conditions.

Versatility

The Rode Dead Cat Wind Muff is compatible with the Rode VideoMic, NTG-1 or NTG-2.

Design

In combination with the miniscreen, the Rode Deads Cat Wind Muff’s furry, zip-on cover design drastically decreases wind noise during inclement weather.

Rode Deluxe Wind Shield WS 9 for Video Micro/Videomic Me

Rode WS9
Deluxe Wind Shield for VideoMicro / VideoMic Me

The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me, featuring open-cell foam covered by synthetic fur designed to minimise wind noise when recording outdoors.

From its humble beginning in the 1990s, RØDE Microphones has gone from strength to strength on the global stage and has become the go-to microphone for a variety of industries. RØDE employs the latest technology and precision machinery to continue to keep its products at world-class standards and at a great price.

Rode Deadcat VMP Plus For Videomic Pro Plus

Fitur Produk

  • Rode Microphones DeadCat VMP + Artificial Fur Wind Shield
  • Penutup angin berbulu deluxe untuk VideoMic Pro +
  • Kompatibilitas : VideoMic Pro + Mikrofon
  • Dirancang untuk mengurangi kebisingan angin saat merekam di luar ruangan
  • Menggabungkan sel busa terbuka yang mengelilingi lapisan luar bulu buatan yang transparan akustik

Rode Deadcat VMPR For Videomic Pro

RODE DeadCat VMPR adalah penutup angin berbulu untuk VideoMic Pro, yang dirancang untuk digunakan dalam kondisi berangin. Bulu yang dirancang khusus sehingga dapat meminimalkan tingkat kebisingan angin sehingga tetap menghasilkan suara audio yg bersih ketika merekam. DeadCat VMPR kompatibel dengan VideoMic Pro menampilkan Rycote Lyre shockmounting. Untuk VideoMic model Pro dengan suspensi Band silakan lihat DeadCat VMP.

Rode SC6-L Dual TRRS Input and Headphone Output for iOS Devices

Rode SC6-L Dual TRRS input and Headphone Output for iOS Devices

Rode SC6-L Dual TRRS input dan Headphone Output for iOS Devices merupakan interface yang dirancang untuk merekam interview dua orang langsung ke perangkat iOS Anda. Antarmuka menerima input mikrofon RODE smartLav +, beberapa jenis RODE VideoMic (bersama dengan adapter TRRS), dan mikrofon pihak ketiga dengan titik koneksi TRRS yang sesuai.

Di salah satu ujung SC6-L, Anda akan menemukan dua jack TRRS 3.5mm. Ini untuk mikrofon Anda. Antara dua jack TRRS adalah output headphone 3,5mm untuk monitoring sinyal yang masuk. Di ujung lain interface Anda akan melihat lightning connector, yang mengarahkan sinyal digital ke perangkat iOS Anda. SC6-L memfasilitasi audio recording pada resolusi 24-bit dan sample rates hingga 48 kHz, menjadikannya unit berkualitas broadcast.

SC6-L bekerja dengan Aplikasi Reporter RODE. Aplikasi ini memungkinkan Anda untuk mengubah preamp gain dan beralih di antara mode record. Anda juga dapat mengaktifkan atau menonaktifkan monitoring langsung dari aplikasi. Aplikasi lain bekerja dengan SC6-L seperti aplikasi Kamera onboard, GarageBand, Voice Memos, dan lainnya. SC6-L kompatibel dengan perangkat yang menggunakan iOS 11 dan yang lebih baru.

Fitur Utama Rode SC6-L

  • 2 x 3.5mm TRRS microphone input
  • 1 x 3.5mm headphone output
  • Hubungkan dengan RODE Reporter App
  • App controls record mode, direct monitoring dan mic-pre gain
  • Device bekerja dengan built-in video/audio capturing apps
  • 2×2 Interface untuk iOS
  • Lightning Connector untuk iOS

Rode Microphone Videomic Pro plus

The Rode VideoMic Pro Plus is a supercardioid condenser shotgun microphone with an integrated Rycote Lyre shockmount, an included rechargeable battery, an improved response over its predecessor (20 Hz to 20 kHz), and improved RF-immunity as well. The microphone can be used to capture audio for camcorders, DSLR, and portable recorders as a source of primary and reference audio.

The VideoMic Pro Plus sports a 3.5mm stereo mini-jack termination, outputs a dual-mono signal, and provides a TRS cable to make the connection. A micro-USB cable is also supplied, which can be used to draw bus-power. The microphone's supercardioid polar pattern ensures that surrounding audio is minimized, and that your recording is focused on the subject in front of the camera. Its inherent low-noise circuitry ensures you will not pick up any sound from the microphone's robust innards. The microphone boasts +20 dB settings for DSLR cameras, a flat setting for high-quality preamps, and a -10 dB pad.

Other features abound, such as an Automatic Power Function, a built-in battery door, and a high-pass filter with cuts at 75 Hz and 150 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being picked up on the resulting track. If you're unsure how loud the audio you're capturing might be, you can set the right channel to record at a lower level for safety. A selectable high-frequency boost is also available by pressing two lower buttons on the rear digital-switcher simultaneously.

To power the VideoMic Pro Plus, you can use the included rechargeable LB-1 lithium-ion battery, which lasts 100 hours on a single charge, two AA batteries, or the micro-USB cable. This microphone features an auto-powering feature which keeps you from draining battery when the camera is not in use. When connected to your camera, the VideoMic Pro Plus detects plug-in power from the audio input on compatible cameras, and this signals the microphone to switch on. When the mic detects a loss in power, either from powering off or disconnecting the camera, the mic shuts off.

Rode SC7 TRS to TRRS Patch Cable

The SC7 3.5mm TRS to TRRS Patch Cable from Rode is designed to allow you to connect the output from Rode's VideoMic GO to a TRRS device, such as an iPhone or iPad. It features color coded, gold-plated connectors, with gray indicating the TRRS, in addition to shielded construction.

Rode SC6 Dual TRRS

The RODE SC6 Dual TRRS Input and Headphone Output for Smartphones is an input/output breakout box for smartphones and tablets. It has two TRRS inputs and one stereo headphone output. It connects to any TRRS device, such as your smartphone, and allows you to use one or two smartLav microphones while providing a headphone jack for monitoring and playback. Use it to monitor audio from the smartLav and input two smartLavs into the mono channel in interview or dual-dialog applications.

Rode SC2 3.5mm TRS patch Cable for iPhone

The SC2 is a high-quality shielded 3.5mm TRS patch cable. The cable extends from 170mm to up to 400mm, and features right-angle connectors for ergonomic use. It is ideal for connecting the output of an Apple iPhone using a RDE i-XY microphone to a DSLR or video camera for capturing scratch audio to camera while the iPhone records the broadcast-quality track.

Rode Deadkitten for Stereo Videomic

The Rode Dead Kitten is an excellent windscreen that's optimized for video applications. Superior shielding with this faux-fur covered windshield in tow. It's also worth noting that the Dead Kitten will work equally as well for any camera microphone that's roughly the same size as the Rode Stereo VideoMic. When you want superb wind noise shielding, trust Rode's Dead Kitten.
Features
  • Optimized for video applications
  • Superior wind shielding with Faux-fur covering
  • Acoustically transparent for quality recordings
  • Compatible with Rode’s Stereo VideoMic
  • Works well for similar sized camera mics


Rode Micon-2 HS1 Headset,Pinmic,Lavalier

The RODE MiConTM connector system provides seamless integration between the RODE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.

Rode Smart Lavailer plus

The Rode smartLav+ is a lavalier microphone for your Apple or Android mobile device that is designed to deliver high-quality audio recording. The smartLav+ clips on to your shirt or lapel, and the sensitive, omnidirectional condenser capsule captures the sound equally from all sides of the microphone. This design lends to effective, hands-free recording of speeches, interviews, dictations and more.

The smartLav+ is equipped with a Kevlar-reinforced cable that has been strain tested up to 10kg to help ensure reliable performance. It uses a grey-sleeved TRRS connector to connect into your smartphone or tablet's headphone input and it works with most audio recording apps.

The smartLav+ also features improved sensitivity and higher signal-to-noise ratio over the original smartLav. The package comes with mic clip with cable management, a foam pop shield and a small carry pouch.

Compatible with iPhone 5S, iPhone 5, iPhone 5C, iPhone 4S, iPhone 4, iPad Air, iPad (3rd generation), iPad 2, iPad mini, iPod touch (4th and 5th generation) & many Android devices.

Rode SC4 TRS to TRRS Adaptor

The SC4 3.5mm TRS to TRRS Adaptor from Rode is designed to let you connect a microphone with a 3.5mm output, such as the Rode VideoMic, to smart devices with a 3.5mm TRRS input. It features color coded, gold-plated connectors, with gray indicating the TRRS connector, in addition to shielded construction. The SC4 is compatible with stereo microphones and combines left and right channels to a mono signal for TRRS compatibility.

Rode SC3 TRRS to TRS Adaptor

The SC3 3.5mm TRRS to TRS Adapter for smartLav from Rode allows you to connect the output of your smartLav microphone to a 3.5mm TRS equipped device, such as a camera or audio recorder. It features color coded, gold-plated connectors, with gray indicating the TRRS input, in addition to shielded construction.

Rode Microphone Video Micro Compact

The VideoMicro from RODE is a compact on-camera microphone that features a cardioid condenser mic capsule for capturing audio recordings. The lightweight microphone can be used when paired with a video camera for applications such as weddings, interviews, and more.

The VideoMicro reduces distracting peripheral sound and focuses on the audio in front of the camera. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in a ceramic anti glare black coating. The mic is powered by camera plug-in power (min. 3V) so no battery is required.

In addition, the VideoMicro includes a Lyre shoe mount that minimizes unwanted vibrations, handling, and cable borne noises, and a WS9 synthetic furry windshield with a foam inner cell, designed for use in outdoor situations where wind and environmental noise can inhibit recordings. A 1/8" TRS patch cable is also included.

12
Cari Produk

Tampilkan hanya



Harga

Kategori
Sub Kategori
Merk/Tipe
  • Canon
  • Sony
  • FujiFilm
  • Olympus
  • DJI
  • GoPro

Copyright ©2020 Sinar Photo. All rights reserved. Syarat & Ketentuan | Kebijakan Privasi