Produk
Somita Tripod ST 3110
This Somita ST-3110 tripod is black and designed with a 3 way Panhead and
the foot that has 3 parts made of rubber. Somita Tripod is very compact, the fan can be folded so it makes it easier for you to carry it while traveling.
the foot that has 3 parts made of rubber. Somita Tripod is very compact, the fan can be folded so it makes it easier for you to carry it while traveling.
Rp 150,000
Rode Microphone Videomic Pro plus
The Rode VideoMic Pro Plus is a supercardioid condenser shotgun microphone with an integrated Rycote Lyre shockmount, an included rechargeable battery, an improved response over its predecessor (20 Hz to 20 kHz), and improved RF-immunity as well. The microphone can be used to capture audio for camcorders, DSLR, and portable recorders as a source of primary and reference audio.
The VideoMic Pro Plus sports a 3.5mm stereo mini-jack termination, outputs a dual-mono signal, and provides a TRS cable to make the connection. A micro-USB cable is also supplied, which can be used to draw bus-power. The microphone's supercardioid polar pattern ensures that surrounding audio is minimized, and that your recording is focused on the subject in front of the camera. Its inherent low-noise circuitry ensures you will not pick up any sound from the microphone's robust innards. The microphone boasts +20 dB settings for DSLR cameras, a flat setting for high-quality preamps, and a -10 dB pad.
Other features abound, such as an Automatic Power Function, a built-in battery door, and a high-pass filter with cuts at 75 Hz and 150 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being picked up on the resulting track. If you're unsure how loud the audio you're capturing might be, you can set the right channel to record at a lower level for safety. A selectable high-frequency boost is also available by pressing two lower buttons on the rear digital-switcher simultaneously.
To power the VideoMic Pro Plus, you can use the included rechargeable LB-1 lithium-ion battery, which lasts 100 hours on a single charge, two AA batteries, or the micro-USB cable. This microphone features an auto-powering feature which keeps you from draining battery when the camera is not in use. When connected to your camera, the VideoMic Pro Plus detects plug-in power from the audio input on compatible cameras, and this signals the microphone to switch on. When the mic detects a loss in power, either from powering off or disconnecting the camera, the mic shuts off.
The VideoMic Pro Plus sports a 3.5mm stereo mini-jack termination, outputs a dual-mono signal, and provides a TRS cable to make the connection. A micro-USB cable is also supplied, which can be used to draw bus-power. The microphone's supercardioid polar pattern ensures that surrounding audio is minimized, and that your recording is focused on the subject in front of the camera. Its inherent low-noise circuitry ensures you will not pick up any sound from the microphone's robust innards. The microphone boasts +20 dB settings for DSLR cameras, a flat setting for high-quality preamps, and a -10 dB pad.
Other features abound, such as an Automatic Power Function, a built-in battery door, and a high-pass filter with cuts at 75 Hz and 150 Hz. The filter will prevent low-end noise such as air conditioners and traffic from being picked up on the resulting track. If you're unsure how loud the audio you're capturing might be, you can set the right channel to record at a lower level for safety. A selectable high-frequency boost is also available by pressing two lower buttons on the rear digital-switcher simultaneously.
To power the VideoMic Pro Plus, you can use the included rechargeable LB-1 lithium-ion battery, which lasts 100 hours on a single charge, two AA batteries, or the micro-USB cable. This microphone features an auto-powering feature which keeps you from draining battery when the camera is not in use. When connected to your camera, the VideoMic Pro Plus detects plug-in power from the audio input on compatible cameras, and this signals the microphone to switch on. When the mic detects a loss in power, either from powering off or disconnecting the camera, the mic shuts off.
Rp 3,705,000
Sirui Tripod Aluminium 4 Section N-2004SK
The Sirui N-2004X Aluminum Tripod is a great tripod for anyone who needs to pack light and reserve the option to, at a moment’s notice, slim down their camera’s support system to just a monopod. The N-2004X features a leg that unscrews and attaches to a second included mounting plate to form a monopod. And, differing from the N-2004 model, the N-2004X features a split center column for a fast and easy transition to low-angle shooting.
Reaching a maximum height of 1625mm, the tripod itself is quite versatile in its own right – the N-2004X weighs just 1.8kg but supports up to 15kg thanks to its thick leg sections (only 3mm difference in diameter of each leg section) and forged aluminum alloy construction. It’s suitable for use with just about any head and any 35mm camera, DSLR, point & shoot, or camcorder.
The N-2004X tripod’s legs fold upward 180° to achieve a relatively compact folded length of 540mm – even with select head models attached. The entire package will fit comfortably in most carry-on bags and many backpacks. A custom case with padded handle is included.
The tripod’s center column is reversible, and the N-2004X comes with a short center column so that you can set up extremely close to the ground for ultra-low-angle shooting. With the center column split and the long section removed, you can set the legs at their widest angle (80°) and shoot from only 145mm off the ground.
- The tripod converts easily into a monopod.
- A new split center column allows for faster and easier transition to low-angle shooting.
- Forged aluminum alloy results in stronger components than the traditional casting process that’s often used for tripod chassis. Forging leads to more compacted metal and enhances the integrity of metal grains so they remain consistent and continuous. This leads to a longer product life and better performance.
- An anodizing surface treatment, produced by an electrolytic oxidation process to increase the thickness of the natural oxide layer on the surface of metal parts, is applied to increase corrosion & wear resistance and surface hardness, and to enhance color durability.
- 3mm diameter difference between each successive leg section for greater overall stability.
- Silicone twist locks for leg stages and anti-leg rotation system for faster, one-handed set-up.
- Automatic leg-angle lock mechanism for speed and convenience – independently lock legs into place at three different angles: 23°, 52° & 80°.
- Short center column allows the tripod to reach extremely low positions – minimum height of 145mm.
- An additional mounting plate attaches to the unscrewed monopod leg to mount a camera. A wrist strap is included for security in case the operator’s grip slips.
- Leg warmer/padding facilitate handling in extreme weather conditions and adds level of protection.
- Center column hook allows you to add a ballast for a sturdier setup in windy conditions
- Reversible 1/4″-20 & 3/8″-16 screw on mounting plate enables the attachment of virtually any camera, camcorder, or head.
- Well-designed padded travel bag with sturdy shoulder strap for carrying is included.
Rp 2,000,000
Sony Shooting Grip With Mini Tripod GP-VPT1
The Sony GP-VPT1 Shooting Grip with Mini Tripod
provides one-handed operation of your multi-terminal equipped Sony
camcorder or camera. It can also fold out into a mini tripod for
hands-free use. The GP-VPT1 features a pan handle with wired remote
control, adjustable grip angle, and zoom, photo, and start/stop record
buttons. A hand strap, cable clamper, and carrying pouch come included.
Your camera mounts to the shooting grip via a 1/4"-20 screw. The wired AV cable uses Sony's Multi Terminal connector, which plugs in to the corresponding port on compatible camcorders/cameras and lets you control zoom, take photos, and start/stop recording using the buttons found on the grip. Using the cable clamper keeps the cable out of the way while recording. The grip angle is adjustable in increments of approximately 10 degrees by pressing the angle adjust button on the side of the grip. This allows you to find the angle that is comfortable for you.
For added convenience, two legs fold out from the shooting grip to turn the GP-VPT1 into a mini tripod, letting you set it on a tabletop for hands-free shooting.
Rp 1,599,000
Sony ECM-CG60 Shotgun Microphone
The ECM-CG60 from Sony
is a pro-quality supercardioid, electret- condenser, monaural shotgun
microphone that can be used to capture audio in several environments for
devices such as video cameras, DSLRs, camcorders, and more.
Some of the features for the ECM-CG60 are that it is designed to improve sound collection within areas of narrow range to pick up targeted sound. For instance, there is a low cut filter that reduces unwanted noise. Also, there is a switch that can select between Norm for picking up natural sound within low-to-high tone ranges, or Low Cut for effectively cutting low tone to reduce wind noise and noise from vibration and air conditioners.
In addition, the ECM-CG60 is powered by an AA alkaline battery, or it can be powered by the mic input jack (plug-in power) on your camera. This mic is built for pro-quality cameras and camcorders equipped with a 3.5mm mic input jack and easily attaches to your industry standard cold shoe.
Rp 2,969,100
Sony ECM-GZ1M Microphone
The Sony ECM-GZ1M Zoom Microphone
is a monaural on-camera microphone that features a hot shoe interface
specifically for Sony cameras and camcorders that have the propriety
Multi-Interface Shoe. The microphone is designed to help isolate the
sound you want originating from the subject while rejecting unwanted
ambient noise. It offers two setting to choose from: a "Gun" Mode which
locks the microphone in a fixed pick-up pattern, and a "Zoom" Mode which
dynamically adjusts the pick-up pattern in relation how much you zoom
in, making the microphone pick-up angle narrower as you zoom closer -
Zoom Mode requires a camera or camcorder with a zoom lens.
- Monaural, electret condenser microphone that powers directly from the camera or camcorder's hot shoe
- Removable windscreen helps reduce wind noise for shooting outdoors
Rp 1,349,000
Sony Microphone ECM-XYST1M
High Quality Audio - High quality sound recording with wide frequency
band (from 0 to 120 degrees). Professional Design - Professional look
and feel in black casing matches professional quality audio. Reduce wind
noise - High quality audio is supported further with included wind
screen. Multi Interface Shoe Compatible - Compatible with Sony Handycam
camcorders, Cyber-shot cameras and Alpha/NEX cameras with Multi
Interface Shoe.
Rp 1,529,000
Sony Wireless Microphone ECM-W1M
Special moments right at the source with this Sony ECM-W1M Bluetooth
Wireless Microphone System. Not only can you record crisp, clear sound
up to 300' (91.44m) away, but you can also enjoy two way communications
between you and your subject. This unique feature enables you to give
your subject direction while capturing only their voice, or you can
chose to capture both their voice and yours while filming.
Compatability: Sony FDR-AX53 HDR-CX675 FDR-AX33 HDR-PJ670 FDR-AX100
HDR-CX900 HDR-PJ540 HDR-PJ810
Rp 2,699,100
Manfrotto MK190X3-3W1 Alu Tripod W 804 MK II
The Manfrotto MK190X3-3W1 Aluminum Tripod pairs the MT190X3 legs with the 804 MK II 3-Way Pan/Tilt Head.
The tripod features a Quick Power Lock System, ground level adapter,
and an Easy Link attachment. It can hold up to 8.8 lb of gear, and has a
maximum height of 67.7". The ground level adapter replaces the center
column to allow the ball head's plate to sit just 8.27" above the ground
with the legs at their widest angle.
The QPL system allows the three leg sections to be completely extended with one hand for simple set up. An Easy Link adapter attachment allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets. Each leg has four angles to accommodate uneven ground or rough terrain.
The included 804 MK II 3-way pan/tilt head incorporates retractable handles to decrease the overall size when not in use. A built-in spring assists with the tilting motion of the head by compensating for heavier lenses and cameras with off-center loads. The head stands 4.7" high, weighs 1.65 lb, and can hold up to 8.8 lb. A 200LT-PL quick release plate is included for quickly attaching and removing your camera from the head.
The QPL system allows the three leg sections to be completely extended with one hand for simple set up. An Easy Link adapter attachment allows instant connection between tripod and accessories, such as LED lights for macro photography and DSLR video applications using Manfrotto articulated arms and brackets. Each leg has four angles to accommodate uneven ground or rough terrain.
The included 804 MK II 3-way pan/tilt head incorporates retractable handles to decrease the overall size when not in use. A built-in spring assists with the tilting motion of the head by compensating for heavier lenses and cameras with off-center loads. The head stands 4.7" high, weighs 1.65 lb, and can hold up to 8.8 lb. A 200LT-PL quick release plate is included for quickly attaching and removing your camera from the head.
Rp 3,400,000
Zhiyun Crane 3 Lab Creator Package
The Zhiyun-Tech CRANE 3 LAB Master Package includes the CRANE 3
LAB gimbal and dedicated accessories that allow for an optimal workflow
with the gimbal. The CRANE 3 LAB supports up to 10 lb and features a
standout design with a top handle. This handle provides an additional
point of stability as well as an easy way to switch to inverted mode.
In addition to the accessories that come standard with the CRANE 3 LAB, such as a mini tripod, the Master Package also includes a quick release baseplate, telescopic monopod, multifunctional gimbal bag, focus/zoom servo kit, two quick setup adapters, a phone holder, and a multifunctional camera belt in size large.
The baseplate lets you easily move your camera between the gimbal and the hanging straps provided on the gimbal bag and camera belt. It accepts the gimbal mounting plate on one side and latches onto the straps on the other. The idea is that when you pack everything away in the gimbal bag, you can leave your camera out for easy access without having to remove the gimbal plate. The monopod is designed to secure to a quick release receptacle on the camera belt and allow for more stable jib-style shots, with the weight of the gimbal taken off your hands and supported by the belt. Even without the belt the monopod can be used as a comfortable extension.
The gimbal bag fits the gimbal, camera, lenses, other accessories, and up to a 15" laptop. It offers hanging straps on the outside and comes with a lens bag and accessories bag to secure to these straps. With an extra-large interior space, pockets, and exterior straps, the bag provides an all-in-one carriage solution for the gimbal. The servo kit consists of the Max and Lite motors for the CRANE 3 LAB. The gimbal supports two motors at the same time, so both can be mounted to control focus and zoom.
The Quick Setup Adapters let you attach the mini tripod or monopod to the bottom of the gimbal by quick release functionality, instead of having to screw it in each time. And the phone holder will hold your smartphone on the side of the gimbal for monitoring. It supports up to 6.3" phones and can be articulated forward and backward as well as folded up when not in use.
Please see a full description of each packaged item below.
In addition to the accessories that come standard with the CRANE 3 LAB, such as a mini tripod, the Master Package also includes a quick release baseplate, telescopic monopod, multifunctional gimbal bag, focus/zoom servo kit, two quick setup adapters, a phone holder, and a multifunctional camera belt in size large.
The baseplate lets you easily move your camera between the gimbal and the hanging straps provided on the gimbal bag and camera belt. It accepts the gimbal mounting plate on one side and latches onto the straps on the other. The idea is that when you pack everything away in the gimbal bag, you can leave your camera out for easy access without having to remove the gimbal plate. The monopod is designed to secure to a quick release receptacle on the camera belt and allow for more stable jib-style shots, with the weight of the gimbal taken off your hands and supported by the belt. Even without the belt the monopod can be used as a comfortable extension.
The gimbal bag fits the gimbal, camera, lenses, other accessories, and up to a 15" laptop. It offers hanging straps on the outside and comes with a lens bag and accessories bag to secure to these straps. With an extra-large interior space, pockets, and exterior straps, the bag provides an all-in-one carriage solution for the gimbal. The servo kit consists of the Max and Lite motors for the CRANE 3 LAB. The gimbal supports two motors at the same time, so both can be mounted to control focus and zoom.
The Quick Setup Adapters let you attach the mini tripod or monopod to the bottom of the gimbal by quick release functionality, instead of having to screw it in each time. And the phone holder will hold your smartphone on the side of the gimbal for monitoring. It supports up to 6.3" phones and can be articulated forward and backward as well as folded up when not in use.
Please see a full description of each packaged item below.
Rp 18,900,000
Zhiyun Crane 3 Lab Handheld Gimbal
The Zhiyun-Tech CRANE 3 LAB takes gimbal design in a different direction with the addition of a handle on top. With an included mini tripod attached on the bottom and this fixed, ergonomic handle on top, the CRANE 3 LAB can be used two-handed for optimal stability. Moreover, the handle enables you to seamlessly switch to underslung mode, whether with one or two hands, and achieve creative shots such as 360° roll shots as you move closer toward a subject. In addition to this innovative design, the CRANE 3 LAB also packs other advanced features, such as wireless video transmission, and provides the ability to stabilize up to 10 lb loads.
The CRANE 3 LAB supports two optional servos at the same time for focus and zoom control directly from the handwheel on the side. At the same time, all the other controls you need are provided at your fingertips at the top of the handle along with an OLED status screen. Additionally, the included ZY PLAY iOS/Android app (free download) provides many of the same control functions as well as special features such as panorama, focus time-lapse, motion time-lapse, long exposure time-lapse, camera settings, and more.
Wireless transmission is achieved via a Wi-Fi connection to an iOS/Android phone or tablet. The CRANE 3 LAB wirelessly transmits your video recording from your camera to your mobile device in real time in 1080p resolution. This feature is compatible with select cameras; please see the Zhiyun-Tech website for a full camera compatibility list.
Zhiyun's LAB series was released along with an ecosystem of optional, dedicated TransMount accessories. One of these is the TransMount Phone Holder, which allows you to mount your phone on the side of the gimbal for monitoring your shot via the ZY PLAY app. Other accessories include a camera belt, specialized monopods that work together with the belt, and the TransMount Quick Setup Adapter, which lets you attach the included mini tripod by quick release functionality. This same adapter can also be used to attach monopods to the bottom of the gimbal for more stable jib-style shots. If you get two of these adapters, you can easily swap a monopod and a mini tripod on the spot as your needs require.
Other features of the gimbal include a Crafted Latch Design that lets you lock an axis or axes while balancing the remaining ones.
The CRANE 3 LAB supports two optional servos at the same time for focus and zoom control directly from the handwheel on the side. At the same time, all the other controls you need are provided at your fingertips at the top of the handle along with an OLED status screen. Additionally, the included ZY PLAY iOS/Android app (free download) provides many of the same control functions as well as special features such as panorama, focus time-lapse, motion time-lapse, long exposure time-lapse, camera settings, and more.
Wireless transmission is achieved via a Wi-Fi connection to an iOS/Android phone or tablet. The CRANE 3 LAB wirelessly transmits your video recording from your camera to your mobile device in real time in 1080p resolution. This feature is compatible with select cameras; please see the Zhiyun-Tech website for a full camera compatibility list.
Zhiyun's LAB series was released along with an ecosystem of optional, dedicated TransMount accessories. One of these is the TransMount Phone Holder, which allows you to mount your phone on the side of the gimbal for monitoring your shot via the ZY PLAY app. Other accessories include a camera belt, specialized monopods that work together with the belt, and the TransMount Quick Setup Adapter, which lets you attach the included mini tripod by quick release functionality. This same adapter can also be used to attach monopods to the bottom of the gimbal for more stable jib-style shots. If you get two of these adapters, you can easily swap a monopod and a mini tripod on the spot as your needs require.
Other features of the gimbal include a Crafted Latch Design that lets you lock an axis or axes while balancing the remaining ones.
Rp 13,900,000
Feelword F6 5.7inc On Camera Monitor
- Rec.709 Color calibration
- Focus Assist (Red, Green, Blue)
- Zebra and False Color function
- Camera Mode
- Image Zoom-in
- Anamorphic Mode
- Image Flip/ Image Freeze/ Image Nine Grid
- Pixel to Pixel/
- Brightness, Contrast, Sharpness, Tint
- Temp Adjustment./ Earphone output
Rp 3,300,000
Feelword F5 5inc On Camera Monitor
Let Your Video Shooting Become Easier
Flexible for Your Creative
Easy Multi-angle Monitoring
F5 Is FEELWORLD Newest Improve User Experience Design
- FEELWORLD has been committed to providing the comprehensive broadcast monitoring and solutions for the professional filmmakers. Whether the upgrade of the excellent display technology from HD to FHD or to UHD 4K resolution, FEELWORLD aims to support the professional creators to obtain the greater benefits and to create more exciting stories, with the most advanced technology to improve the production efficiency.
- When you’ve put together rigs made up of powerful equipment, you want to be able to see shots that so much work has now gone into getting to that point. No matter the setup, whether it’s a shoulder rig, gimbal, tripod, or handheld, you need a FEELWORLD monitor for all your setups which allow you to see, in perfect definition, make sure your shot in focus and accurate exposure, what you are shooting so that you know that the shot you are working hard to get is truly stellar.
Flexible for Your Creative
- As a filmmaker you need to pay special attention to the visual aspect in order to capture every moment of emotion. For that reason you can always trust FEELWORLD monitors technology, which allows you to bring your full capacity and creativity taking care of every detail in the most efficient way possible. FEELWORLD monitor helps you to capture those precious moments that you cannot afford to miss.
Easy Multi-angle Monitoring
- It’s not easy to evaluate your shot solely through your camera’s built-in monitor, especially if the entire unit is constantly rotating on a gimbal/ stabilizer, the camera on crane rig jib, One of the biggest issues when you are doing low-angle/ high angle shot is monitoring what you’re shooting. FEELWORLD monitor is ideal tool for you to monitor the scene since you can install it where you can conveniently see it.
F5 Is FEELWORLD Newest Improve User Experience Design
- 5 inch small lightweight design, ideal both for gimbal and camera setups, full HD 1920X1080 resolution, with Rec.709 professional color calibration, accurate color reproduction. 4K HDMI Input/ Output Without Delay. Come with a 360° tilt arm better monitoring angel, instead traditional hot shoe mount. 8.4V DC out, real time power charge for camera. Built in two battery plate: Sony F970, Canon LP-E6.
Rp 2,550,000
Wasabi Power Kit BTR-FW50
The Wasabi Power battery and charger kit include 2 batteries and one
charger with a European plug and car adapter. All items meet or exceed
OEM standards.
Rp 599,000
MOZA Air 2 Camera Stabilizer
The Moza Air 2 3-Axis Handheld Gimbal Stabilizer has been
upgraded over previous versions with newly optimized high-torque motors,
a 9.25 lb weight capacity, and many other features. The high weight
capacity allows for a much wider range of cameras to be used, as well as
wider combinations of cameras and lenses. The Air 2 also supports the
optional Moza iFOCUS Intelligent Wireless Lens Control System, which
comes in different versions to offer standard and automatic (with preset
start/end points) focus and zoom control directly from the Air 2.
Rp 8,000,000
ZHIYUN Weebill Lab Creator Package
- WEEBILL LAB Gimbal, 6.6 lb Payload
- TransMount Phone Holder for Monitoring
- TransMount Max Zoom/Focus Servo
- TransMount Mini Monopod
- TransMount Camera Belt for Monopod
- 2 Quick Release Tripod/Monopod Adapters
- Standard and Underslung Operation Modes
Rp 11,800,000
VISICO VL400 plus Softbox Kit 2 Head
Visico VL 400 Plus Softbox 2 Head 50 x 70 Studio Kit is a studio kit sales package consisting of 2 visico vl 400 plus, 2 visico light stands LS 8005, 2 visico softbox 50 x 70, 1 visico transmitter 816, and 1 visico kb- f kit bag. You can use this Studio Kit on a type of DSLR or mirrorless camera that serves to help you get a more professional-looking and quality image effect or result. This studio kit is made of quality materials and can be used for professional photographers and amatuers.
Features:
Studio kit
Can be used for several types of DSLR and mirrorless cameras
Serves to help you get the effect of images or results that look more professional, and quality
Can be used for professional photographers or amatuers
Consists of: 2 visico vl 400 plus, 2 visico light stand LS 8005, 2 visico softbox 50 x 70, 1 visico transmitter 816, and 1 visico kb-f kit bag
Can be used for several types of DSLR and mirrorless cameras
Serves to help you get the effect of images or results that look more professional, and quality
Can be used for professional photographers or amatuers
Consists of: 2 visico vl 400 plus, 2 visico light stand LS 8005, 2 visico softbox 50 x 70, 1 visico transmitter 816, and 1 visico kb-f kit bag
Rp 5,450,000
VISICO VL100 plus Softbox Kit2 Head
- Visico VT-100 Flash Head 2
- Visico LS-8005 Light Stand 2
- Visico SB-030 Softbox 50x70cm 2
- Visico KB-F Kit Bag 1
- Transmitter 816 tx 1
Rp 3,550,000
VISICO VC300 HH Softbox Kit 2 Head
VISICO VC FLASH HEAD 2
SOFTBOX 90X90/80X120 2
LIGTH STAND 80 2
REMOTE 801 TX 1
TRAVEL BAG 1
SOFTBOX 90X90/80X120 2
LIGTH STAND 80 2
REMOTE 801 TX 1
TRAVEL BAG 1
Rp 7,350,000
VISICO LED Light LED-150T 5500k
- The LED 150T is a light weight and small size LED Light. Soft diffuser included.
- Very powerfuil light, equivalent to about 1500W in incandescent lighting.
- The LED 150T is light weight and small size.
- It is very bright and affordable (equivalent brightness to over 1500W in tungsten lighting).
- Include Cloth Difuser
- A clear LED display shows the output of the lamp.
- Photographers may use it for both video and photography shoots. Connected to Visico CR-3200 1000W Power Pack
- it may also be used for outdoor photography, location shooting, wedding shooting.
- The LED 150T use Bowens mount, can fited with reflectors, softboxes, snoots, grids, barndoors and so on, to create various lighting effects.
- The LED 150T power can also be remotely controlled by the VC-801TX remote control.
- Colour emperature is 5500K (Daylight)
- CRI is >93
Rp 5,148,000
