The XPRO Prime Base Aluminum Monopod from Manfrotto is a lightweight, sturdy camera support weighing in at just 2.4 lb. This 3-section support has a maximum height of 66.14", a folded length of 26.2", and supports up to 22.05 lb.

The XPRO monopod line utilizes the Manfrotto Quick Power Flip-Lock to facilitate rapid set-up and break-down while maintaining strength and rigidity. The D-shaped aluminum tubing helps to improve overall stability by preventing unwanted rotation inside the locking mechanism. A built-in 3-foot base allows the monopod to free-stand when properly balanced. The integrated rubber legwarmer provides a comfortable grip in both hot and cold weather, while the provided wrist-strap adds extra security.

• Large Dot Matrix LCD: 16 Groups and 32 Channels to Wirelessly Control and Trigger. Full Graphic Display of 5 Groups simultaneously
• Versatile Trigger: As a Wireless Godox Flash Trigger/A Wireless Fuji Speedlites Trigger/A Wireless Shutter Release Trigger/A Flash Trigger with 2.5mm Sync Cord Jack
• 01-99 Wireless ID: Only Achieve Triggering when the Channels and Wireless IDs of the Master and Slave unit are Set to the Same, Avoiding Signal Interference effectively
• Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode
• Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc
• TTL Autoflash: Fuji-TTL II
  Manual flash mode: Yes
  Multi (Stroboscopic) flash mode: Yes
  Function
  HSS (High-speed sync): Yes
  Second-Curtain Sync: Yes
  Flash exposure compensation: Yes,±3 Stops in 1/3 stop increments
  Flash exposure lock: Yes
  Auto Focus Assist: Yes
  Modeling Lamp Control: Control the modeling lamp by the flash trigger
  Beeper: Control the sound of the flash trigger
  Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
  ZOOM setting: Adjust the ZOOM coverage value from the transmitter
  TCM function: Transforms the TTL shooting value into the output value in M mode
  Firmware upgrade: Upgrade through the Type-C USB port
  Memory function: Settings will be stored 2 seconds after last operation and recover after a restart
  Wireless Flash
  Wireless Signal Range: >328 feet / >100 Meters
  Remote System: 2.4GHz
  Modulation Mode: MSK
  Channels: 32
  Wireless ID: 01-99
  Groups: 16
  Dimensions: 3.5x2.3x2.0"/ 90x58x50mm
  Display: Large LCD panel with customizable backlight PACKAGE CONTENTS:
  1* Godox Xpro-F
  1* Product Manual
  1* Pergear Cleaning Kit

• Includes 2 batteries and 1 charger for the Olympus BLN-1
• Each battery features Premium cells, 7.6V, 1300mAh
• Charge 2 batteries at a time from any USB power source; Outputs 600mA (x2)
• Batteries must be charged with Wasabi Power charger; Charger works with the original Olympus batteries

The GoPro Floaty Backdoor is compatible with all GoPro HERO4, HERO3+ and HERO3 waterproof housings. It enables your camera to float in water when it's encased in its waterproof housing. The Floaty Backdoor attaches to the backdoor of the waterproof housing with an adhesive anchor. A standard housing backdoor is included as well, so you can change out your existing one and keep that one in reserve for shooting on dry land. The Floaty Backdoor is ideal for watersports like surfing, snorkeling, wakeboarding and more. Plus, its bright orange color makes it easy to spot in the water for the times when your camera comes detached from your board or mount. Two camera tethers are also included for added security in extreme conditions.

• If you use the LCD BacPac, the Floaty will obstruct the LCD screen.
• Easy-to-spot flotation device for GoPro HERO4, HERO3+, and HERO3 cameras
• Attaches directly to the housing backdoor
• Perfect for snorkeling, surfing, wakeboarding and other deep-water activity
• Includes two adhesive anchors and two camera tethers for added security in extreme conditions

The GoPro Floaty is compatible with all GoPro HERO5, HERO4, HERO3+ and HERO3 waterproof housings. It enables your camera to float in water when it's encased in its waterproof housing. The Floaty attaches to the backdoor of the housing with an adhesive anchor. The Frame backdoor for the HERO5 Black and a standard housing backdoor for the HERO4, HERO3+ and HERO3 waterproof housings are included as well, so you can change out your existing backdoor and keep that one in reserve for shooting without the Floaty. The Floaty Backdoor is ideal for watersports like surfing, snorkeling, wakeboarding and more. Plus, its bright orange color makes it easy to spot in the water for the times when your camera comes detached from your board or mount. A camera tether is also included for added security in extreme conditions.

Note: If you use the LCD BacPac, the Floaty will obstruct the LCD screen.

The Canon EOS M50 is a midrange mirrorless camera with a 24MP APS-C CMOS sensor, DIGIC 8 processor and Dual Pixel AF. With select lenses it offers Dual Pixel coverage of 88% x 100% and 143 AF points, with other lenses offering 80% x 80% coverage and 99 AF points. The M50 is the first Canon camera to use the CR3 Raw format, allowing for up to 50% smaller file sizes. The M50 is capable of taking burst at 7.4 fps with continuous autofocus for up to 10 Raw or 47 JPEGs.

The M50 has a fully articulating 3" touchscreen LCD with 1.04 million dots as well as an OLED electronic viewfinder with 2.36M dots. It can record 4K UHD video at 30p, albeit with a substantial crop and no Dual Pixel AF. Connectivity options include Wi-Fi and Bluetooth.