This microSDHC memory offers an SD Class 10 rating along with an Ultra High Speed Class 1 rating, for read speeds up to 98 MB/s and lower write speeds that should at least be able to exceed the Class 10 minimum of 10 MB/s. These speeds make the card ideal for capture and transfer of full HD 1080p video. A built-in write-protect switch found on the SD adapter prevents accidental data loss.

You can insert the card into any microSDHC-compatible device, such as a mobile phone. Plus, the included microSD adapter enables you to insert the card into any full-sized SD slot, making it compatible with SDHC-compatible devices like digital cameras and card readers. As far as durability, this compact memory solution is waterproof, shockproof, and protected against X-rays. It's also backed by a ten-year limited warranty in the USA.

The Haida Multi-coating Circular Polarizing (PROII) filter helps to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface. The light from the sun naturally becomes partially polarized due to reflecting off electrons in air molecules, causing the light to scatter into what appears as haze. A polarizing filter arranges, and filters, this directionally polarized light perpendicularly to the reflected light, allowing for the absorption of much of this light. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage.

A circular polarizer only differs from a linear polarizer in that it contains a quarter wave plane in addition to the linear polarizing filter. The addition of this quarter wave plane is to circularly polarize the linearly polarized light for the use of auto focus and exposure functions. Due to how the light is broken down and filtered with a linear polarizer, auto focus and exposure accuracy become skewed during use. When the light becomes circularly polarized, it permits the use of these functions.

Haida MC C-POL (PROII) filters are constructed from high quality glass for increased optical clarity and color fidelity. They feature an aluminum filter ring for durability as well as jamming prevention. This filter is both an anti-reflection coating as well as a protective surface. It helps to increase light transmission by reducing reflections, scattered light, and ghosting. Additionally, it offers greater protection to the filter substrate and stays cleaner for longer than uncoated filters.

The A1005 Aluminum Tripod with Y-10 Ball Head from Sirui is a 5-section tripod that weighs 2.6 lb. The aluminum legs fold a full 180 degrees in reverse to make it a compact 14". With the center column fully extended, the tripod can reach a maximum working height of 55.1". Additionally, with a load capacity of 22 lb, this tripod is suitable for a pro DSLR with a large telephoto lens.

The hook at the bottom of the center column enables you to hang a small sandbag or camera bag to stabilize the tripod. Plus, variable leg-angles allow the tripod to have a minimum height of 10.2", and the center column is also reversible to let you get even closer to the ground. Sometimes a tripod is not allowed in certain areas because space is limited. That is when a useful feature comes into play the tripod's leg detaches and converts into a monopod. You can increase the height of this monopod by attaching the center column to it.

The included Y-10 Ball Head is Arca-type compatible and comes equipped with a quick release plate. It also has a knob-style lock for the clamp, and two separate knobs control the movement of the ball and 360 degrees panning base. In addition, with the ball head's single-cut notch, the camera can be placed in a 90 degrees angle.

The Fujifilm X-H1 is the company's flagship APS-C mirrorless camera. It features a 24.3MP APS-C sensor with an X-Trans color filter. In-body image stabilization can reduce shake by up to 5.5 stops and the X-H1 weather-sealed body features a bevy of controls and an LCD info display on its top plate. The X-H1 has a unique articulating 3" touchscreen LCD that can tilt up and down and out to the side (in one direction). Its electronic viewfinder is quite large and has a resolution of 3.69 million dots.

The camera can shoot continuously at up to 14 fps with the electronic shutter, 11 fps with the mechanical shutter and optional grip and 8 fps without the grip. It can capture both DCI and UHD 4K video at 24 and 30p, respectively. With the power battery grip, continuous 4K recording times can reach 30 minutes. It has a new EXTERNA Film Simulation Mode and also supports F-log gamma for easier video color grading. Connectivity options include Wi-Fi and Bluetooth.