Materials: Environmentally oxidized aviation aluminum

Raw materials: Germany imported optical glass

Coating: Double-side anti-reflection coating

Thickness:3.42mm

Applicable diameter:30mm 37mm 40.5mm 43mm 46mm 49mm 52mm 55mm 58mm 62mm 67mm 72mm 77mm 82mm 86mm 95mm 105mm 150mm

• YUNTENG 950 is a full-featured video and DSLR tripod head which with quick release plate for smooth and professional shooting.
• The built-in counterbalance system comprised of a sliding camera platform, optimizing tilt control.

Power, speed, and integrated radio transmission make the VING V860IIC TTL Li-Ion Flash Kit from Godox a hard-to-beat option for your Canon cameras. Fully compatible with E-TTL / E-TTL II systems, the V860IIC supports many advanced functions and features. Also, it features the Godox 2.4GHz X wireless radio system which provides both master and slave TTL functionality with a range of up to 328'. On top of this, the flash is powerful and versatile, featuring a guide number of 197' at ISO 100 and 200mm along with a zoom range of 20-200mm, which can be expanded to 14mm with the use of the pull-out panel. And, this flash runs off a rechargeable Li-ion battery pack, that ensures fast recharge and long-lasting shoots.

For general operation, the V860IIC features full bounce flash capabilities, including tilting from -7 to 90 degrees and rotation left and right 180 degrees. As a E-TTL / E-TTL II-compatible unit, this flash offers support for high-speed sync, flash exposure compensation, 1st and 2nd curtain sync, and much more. Additionally, it can function as an optical master or slave unit if needed.

• Applies to Canon DSLR series cameras with TTL autoflash
• Master & Slave Flash
• Supports HSS (max. 1/8000s)
• FEC, front & rear curtain sync, multi flash, manual flash, etc

The MVMXPRO500US XPRO Monopod from Manfrotto is a 4-section aluminum video support equipped with Manfrotto's FLUIDTECH base and a 500-series fluid tilt head.

A versatile kit for nearly any videographer or filmmaker, the MVMXPRO500US can often travel places tripods cannot, providing additional stability and supporting heavy equipment when required. The 4-section design, paired with an aluminum construction, results in an easy to transport setup weighing just 4.6 lb. With a maximum height of 79.9" and a minimum height of just 30.7", the MVMXPRO500US can be adjusted to suit users of varying heights and for various different tasks.

While the design of a monopod is relatively simple, the Manfrotto Monopod+ line utilizes some innovative features which make using the MVMXPRO500US fast and easy. The primary feature of the line is the inclusion of Manfrotto's patented Power-Lock flip locks which snap open and closed to ensure fast operation and a tight, unyielding lock. The D-shaped leg sections have been designed not only to compliment the Power-Locks but also to prevent unwanted twisting between leg sections and increase the stability of the monopod. The integrated FLUIDTECH base utilizes a "3D" fluid cartridge which facilitates smooth pans and tilts from a single connection point. The cartridge may be locked vertically to isolate movement to only the 360 degrees panning axis, allowing for smooth, level, uninterrupted rotation. While engaging the vertical lock may allow the monopod to stand, it does not support free-standing function and should not be left unattended when not in use.

The MVMXPRO500US also includes a modified 500 series fluid head which allows the user to tilt their camera forward and backward on a counter-balanced mechanism. The head may be used while moving freely or locked in place via a side-mounted knob. Control of the head is facilitated by a single, long control arm which may be adjusted to the height of the user. A 500-series quick release plate is also included, allowing for quick vertical mounting and dismounting of your camera or camcorder.

Additionally, the Monopod+ line also features Manfrotto's standard rubber leg warmer for an improved grip and an adjustable hand strap for extra security. A 1/4"-20 and 3/8"-16 mounting thread is provided under the 500 series head should the user choose to use the monopod without a head for direct camera mounting.

• Square 1: 1 format
• For use with Instax square format instant cameras
• 10 exposures